EFTA01126198

4( Printing 
Zo
4 PC
C:;):In
. 1 <mr.
' 
Mooing 
590 kr 
Pict, steboil 
Pnoio 
Caron 
F, °orderless 
Print 
W 
c•cn 
nrring 
Paper IKONS 
Canal 
Pint 
5 Set the date and file number 
imprinting. 
• Set as necessary. 
• Select <P.», then press <0>. 
• Set as desired, then press <C)>. 
6
 Set the number of copies. 
• Set as necessary. 
• Select <Q», then press <Oa. 
• Set the number of copies, then press 
<cp.. 
7 Start printing. 
• Select [Print), then press <e>. 
1:41 • With Easy printing, you can print another image using the same settings. 
Just select the image and press the <a> button. With Easy printing, the 
number of copies will always be 1. (You cannot set the number of 
copies.) Also. any trimming (p.243) will not be applied. 
• The (Default) sating for printing effects and other options are the 
printer's own default settings as set by the printer's manufacturer. See 
the printer's instruction manual to find out %fiat the (Default) settings are 
• Depending on the image's file size and image-recading quality, it may 
take some time for the printing to start after you select [Print). 
• If image tilt correction (p.243) has been applied, it may take longer to 
print the image. 
• To stop the printing, press <C)> while (Stop) is displayed, then select 
(01q. 
• If you execute (Clear all camera settings) (p.176), all the settings will 
revert to the default. 
241 
EFTA01126438

et Printing 
E Adjustment of Printing Effects 
R.-dried 
011itural M 
3Otress 
Admt kids 
Off 
&pinion 
Off 
hed-eve 0:fr 
On 
In step 4 on page 240. select the printing 
effect. When the <9> icon Is displayed 
brightly next to <Ca>. you can press 
the <INFO.> button to adjust the printing 
effect. What can be adjusted or what is 
displayed will depend on the selection 
made in step 4. 
• Brightness 
The image brightness can be adjusted. 
• Adjust levels 
When you select [Manual]. you can change 
the histogram's distribution and adjust the 
image's brightness and contrast. 
With the Adjust levels screen displayed. press 
the <INFO.> button to change the position of 
the <I>. Press the < 40,  > key to freely adjust 
the shadow level (0-127) or highlight level 
(128-255). 
• *Brightener 
Effective in backlit conditions which can make the subject's face look 
dark. When (On] is set. the face will be brightened for printing. 
• Red-eye GMT. 
Effective in lash images where the subject has red eye. When (On] 
is set. the red eye will be corrected for printing. 
47 S' 
3 • The fa; Brightener] and (Red-eye corr.) effects will not show on the screen. 
• When you select (Detail set.). you can adjust the (Contrast]. 
(Saturation). (Color tone). and [Color balance). To adjust the (Color 
balance). use the <.>, keys. B is for blue. A is amber. M is magenta. 
and G is green. The color in the respective direction will be corrected. 
• If you select (Clear all). al the printing effect settings WI be reverted to 
the default. 
242 
EFTA01126439

4( Printing 
Trimming the image 
Tilt correction 
You can crop the image and print only 
the trimmed portion as if the Image was 
recomposed. Do the trimming right 
before printing. II you set the trimming 
and then set the print settings, you may 
have to set the trimming again. 
1 On the print setting screen, select [Trimming'. 
2 Set the trimming frame size, position, and aspect ratio. 
• The image area within the trimming frame will be printed. The 
trimming frame's aspect ratio can be changed with [Paper settings). 
Changing the trimming frame size 
When you press the <cl > or <C3I-0,> button. the size of the 
trimming frame will change. The smaller the trimming frame, the 
larger the image magnification will be for printing. 
Moving the trimming frame 
Press the <4>> key to move the frame over the image vertically or 
horizontally Move the trimming frame unti it covers the desired mage area. 
Rotating the frame 
Pressing the <INF0.> button will toggle the trimming frame 
between the vertical and horizontal orientations. This enables you 
to create a vertical-oriented print from a horizontal image. 
Image tilt correction 
By turning the <s> dial. you can adjust the image tilt angle up to 
±10 degrees in 0.5-degree increments. When you adjust the 
image till, the ca› icon on the screen will turn blue. 
3 Press ce> to exit the trimming. 
► The print setting screen will reappear. 
• You can check the trimmed image area on the upper left of the 
print setting screen. 
243 
EFTA01126440

el Printing 
• Depending on the printer, the trimmed image area might not be printed 
as you specified. 
• The smaller you make the trimmre frame, the grainer the picture will 
look in the print. 
• While trimming the image, look at the camera's LCD monitor. If you look 
at the image on a TV screen, the trimming frame might not be displayed 
accurately. 
"F71 
in Handling Printer Errors 
If you resolve a printer error (no ink. no paper. etc.) and select (Continue) to 
resume printing but it does not resume. operate the buttons on the printer to 
resume printing. For details on resuming the printing. see the printer's 
instruction manual. 
Error Messages 
If a problem occurs during printing. an error message vii appear on the 
camera's LCD monitor. Press <O,  to stop printing. After fixing the 
problem. resume printing. For details on how to fix a printing problem. refer 
to the printer's instruction manual. 
Paper Error 
Check whether the paper is property loaded in the printer. 
Ink Error 
Check the printer's ink level. and check the waste ink tank. 
Hardware Error 
Check for any printer problems other than paper and ink problems. 
File Error 
The selected image cannot be printed via PictBAdge. Images taken with a 
different camera or images edited with a computer might not be printable. 
244 
EFTA01126441

" Digital Print Order Format (DPOF) 
You can set the print type, date imprinting, and file No. imprinting. The 
print settings will be applied to all print-ordered images. (They cannot 
be set individually for each image.) 
Setting the Printing Options 
sure 
tone ans 
ma
s 
isni w
Cress firers 
Select [Print order]. 
• Under the (al tab, select (Print 
order). then press Ce>. 
1.$171,
2 Select [Set up]. 
AIWA was 
JStandarti 
0 pnots 
• Select (Set up). then press <e>. 
Clint 
Ott 
Fie Si 
Off 
SS Inapt 
By. 
Am nap 
Sew, 
3 Set the option as desired. 
• Set the (Print type]. Patel, and [File 
No.]. 
• Select the option to be set, then press 
(Punt type] 
<5>. Select the desired setting. 
then press <5,.. 
[Oa* 
[File No.] 
245 
EFTA01126442

es Digital Print Order Format (DPOF) 
Print type 
Q Standard Prints one image on one sheet. 
e Index 
Multiple thumbnail images are printed on we sheet. 
a
i
Both 
Prints both the standard and index prints. 
Date 
On 
[On) empreds the recorded date on the print. 
Off 
Fie number 
On 
[On) inprints the file No. on the print. 
Off 
4 Exit the setting. 
• Press the <MENU> button. 
► The print order screen will reappear. 
• Next, select fSel.lmage). [Bye). or 
All Image) to order the images to be 
printed. 
• Even if (Date) and [File No.) are set to (On). the date or file No. might not 
be imprinted depending on the print type setting and printer model. 
• When pnnting with DPOF. you must use the card whose prat order 
specifications have been set It will not work if you rust extract images 
from the card and by to print them. 
• Certain DPOF-compabble pellets and photofinishers might not be able 
to print the images as you specified. If this happens with your printer. 
refer to the printer's instruction manual. Or check with your photofinisher 
about compatibility when ordering prints. 
• Do not insert into the camera a card whose print order was set by a 
different camera and then try to specify a print order. The print order may 
not work or may be overwritten. Also. depending on the image type. the 
print order may not be possible. 
• RAW images and movies cannot be print ordered. You can print RAW 
magas through direct printing (p.236). 
• With (Index) prints, both the [Date) and Wile No.) cannot be set to (On) 
at the same time. 
246 
EFTA01126443

to Digital Print Order Format tDPOF) 
Print Ordering 
• Sol.lmage 
,NPrn: oraer 
Stirdird 
) rent 
• Mon 
2 laws 
War 
On 
/It Mn 
off 
1..e, 
him 
An rnir 
Set Lci 
CE9 
is 2 : 07 a 
Quantity 
Select and order images one by one. 
To display the three-image display, press 
the <WI.> button. To return to the 
single-image display. press the <a> 
button. 
After completing the print order, press 
the <MENU> button to save the print 
order to the card. 
[Standard] [Both] 
Press the <0> key to set the number of 
copies to be printed for the displayed 
Total images selected 
image. 
[Index] 
Press the <0> key to checkmark the 
box <J> and the Image will be included 
in the index print. 
Check mark 
Index cal 
• Byllg 
Select (Mark all In folder] and select the folder. A print order for one 
copy of all the images in the folder will be placed. If you select [Clear 
all In folder] and select the folder, the print order for that folder will 
all be canceled. 
• All Image 
If you select [Mark all on card], one copy of all the images in the 
card will be set for printing. If you select [Clear all on card], the print 
order will be cleared for all the images in the card. 
• Note that RAW images and movies will not be included n the print order 
even if you set 13y." or 'All image.' 
• When using a PictBridge printer. print no more than 40O images for one 
print order. If you specify more than this. all the images might not be 
printed. 
247 
EFTA01126444

i  Direct Printing with DPOF 
With a PictBridge printer, you can easily 
print images with DPOF. 
—15,tendard 
runes 
If ran 
/ raw', 
3.4" 
e so 
CoPi 
',Lie 
1 Prepare to print. 
• See page 236. Follow the 'Connecting the Camera to a Printer' 
procedure up to step 5. 
2 Under the [al tab, select [Print order]. 
3 Select [Print]. 
• (Print] will be displayed only if the camera is connected to a 
printer and printing is possible. 
4 Set the [Paper settings] (p.238). 
• Set the printing effects (p.240) if necessary. 
5 Select [OK]. 
4. • Before printng. be sure to set the paper size. 
• Certain printers cannot imprint the file No. 
• If (Bordered) is set. certain printers might imprint the date on the border. 
• Depending on the printer, the date might look light if it is imprinted on a 
bright background or on the border. 
• Under (Adjust levels). [Manual] cannot be selected. 
• If you stopped the printing and want to resume printing the remainng 
Outgoes. select (Resume). Note that printing will not resume if you stop 
the printing and any of the folowng occurs: 
• Before resuming the printng. you changed the print order or deleted 
print-ordered images. 
• When you set the index, you changed the paper setting before 
resuming the printng. 
• When you paused the printing. the cares remaining capacity was low. 
• If a prcblem occurs during printing, see page 244. 
248 
EFTA01126445

Customizing the 
Camera 
You can customize various camera features to suit your 
picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes. 
EFTA01126446

MENU Setting Custom Functions *
Ct....tern Funtoorn(C in) 
(conked informatnnn 
cell RCN% 
Firms. Vet 10.0 
Custom Function No. 
C in I Extolunt 
E novice erne! ninnerns 
C in I Extolunt 
E novice 'erne! ninnerns 
1 Select [Custom Functions (C.Fn)]. 
• Under the [VI tab. select (Custom 
Functions (C.FO. then press <e>. 
Select the Custom Function No. 
• Press the <0> key to select the 
Custom Function No.. then press 
ce>. 
3 Change the setting as desired. 
• Press the <AY> key to select the 
setting (number), then press <C)>. 
• Repeat steps 2 and 3 If you want to 
set other Custom Functions. 
• At the bottom of the screen. the 
current Custom Function settings are 
indicated below the respective 
function numbers. 
4 Exit the setting. 
• Press the <MENU> button. 
Ir. The screen for step 1 will reappear. 
Clearing All Custom Functions 
Under (9! Clear settings). select [Clear all Custom Func. (C.F 0] to 
clear all the Custom Function settings (p.176). 
250 
EFTA01126447

Qin Setting Custom Foxboro* 
Custom Functions 
C.Fn I: Exposure 
1 I Exposure level increments 
2 
ISO expansion 
Flash sync. speed in Av mode 
3 
p.252 
C.Fn II: Image 
4 
Long exposure noise reduction 
p.253 
5 
High ISO speed noise reduction 
p.254
6 
Highlight tone priority 
C.Fn III: AutofocusiDrive 
7 
AF-assist bean fring 
8 
Mirror lockup 
p.255 
LV shooting 
O 
O 
O 
O 
O 
O 
O gem italt) 
' If you use an EX-series Speedlite (sold separately) equipped with a LED light 
the LED light will tum on for AF-assist even in the Ya- 
and M. modes. 
C.Fn IV: Operation/Others 
9 
Shutter/AE locic button 
p.256
10 Assign SET button 
11 
LCD display vMen pow& ON 
p.257 
O 
O (Except 3) 
jI The shaded Custom Functions do not take effect during Live View (LV) 
shooting. (Setengs are disabled.) 
251 
EFTA01126448

OM Custom Function Settings * 
Custom Functions are organized into lour groups based on the function 
type: C.Fn I: Exposure. C.Fn II: Image. C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others. 
C.Fn I: Exposure 
C.Fn-1 
Exposure level increments 
0: 113-stop 
1: 1/2-stop 
Sets 1/2-stop increments for the shutter speed. aperture, exposure 
compensation. AEB. flash exposure compensation. etc. Effective when 
you prefer to control the exposure in less line increments than 1/3-stop 
increments. 
V With setting 1. the exposure level vnll be displayed in the viewfinder and on 
the LCD monitor as shown below. 
k'S 4.5""ty''" ta' 
1.2.
1 .C ; 1 . 2:3 
C.Fn-2 
ISO expansion 
0: Off 
1: On 
For the ISO speed. 'If (equivalent to ISO 12800) will be selectable. 
Note that if [C.Fn-6: Highlight tone priority] has been set to (1: 
Enable]. 'Ff cannot be set. 
C.Fn-3 
Flash sync. speed in Av (Aperture-priority AE) mode 
When you use flash in the aperture-priority AE mode (Av). you can set the 
flash sync speed. 
0: Auto 
The flash sync speed is set automatically within a range of 11200 sec. to 
30 sec. to suit the scene's brightness. With an external Speedlite. high-
speed sync is also possible. 
1: 11200-1160 sec. auto 
Prevents a slow shutter speed from being set in low-light conditions. It is 
effective for preventing subject blur and camera shake. Hcnvever, while 
the subject will be properly exposed with the flash, the background may 
come out dark. 
252 
EFTA01126449

Cara Custom Function Settings* 
2: 11200 sec. (fixed) 
The flash-sync speed is fixed to 1f200 sec. This more effectively 
prevents subject blur and camera shake than with setting 1. However. 
the background may come out darker than with setting 1. 
0  When 1 or 2 S set. high-speed sync cannot be used with an external 
Speedlite. 
C.Fn II: Image 
C.Fn-4 
Long exposure noise reduction 
0: Off 
1: Auto 
For 1 sec. or longer exposures. noise reduction is performed 
automatically if noise typical of long exposures is detected. This [Auto] 
setting is effective in most cases. 
2: On 
Noise reduction is performed for all exposures of 1 sec. or longer. The 
[On] setting may be effective for noise that cannot be detected or 
reduced with the [Auto) setting. 
• With settings 1 and 2. after the picture is taken. the noise reduction 
process may take the same amount of time as the exposure. You cannot 
take another picture until the noise reduction process is completed. 
• At ISO 1600 and higher. noise might be more pronounced with setting 2 
than with setting 0 or 1. 
• With setting 1 or 2. if a long exposure is shot with the Live View image 
displayed. 'BUSY' we be displayed during the noise reduction process. 
The Live View display will not appear and the noise reduction es 
completed. (You cannot take another picture.) 
253 
EFTA01126450

EED Custom Function &Amp • 
C.Fn-5 
High ISO speed noise reduction 
Reduces the noise generated in the image. Although noise reduction is 
applied at all ISO speeds. it is particularly effective at high ISO speeds. At 
low ISO speeds. the noise in the shadow areas is further reduced. Change 
the setting to suit the noise level. 
0: Standard 
1: Low 
2: Strong 
3: Disable 
• With setting 2. the maximum burst for continuous shooting will greatly 
decrease. 
• If you playback a OE or (20 +IL image with the camera or print an 
image directly. the effect of the high ISO speed noise reduction may look 
minimal. You can check the noise reduction effect or print noise-reduced 
images with Digital Photo Professional (provided software. p.302). 
C.Fn-6 
Highlight tone priority 
0: Disable 
1: Enable 
Improves the highlight detail. The dynamic range is expanded from the 
standard 18% gray to bright highlights. The gradation between the grays 
and highlights becomes smoother. 
• With setting I. the Auto Lighting Optimizer (p.109) is automabcaly set to 
(Disable] and the setting cannot be charged. 
• With setting I. noise may become slightly more pronounced than with 
setbrg 0. 
.10 With setting I. the sellable range car be ISO 200 - 6400. 
Also. the <D4-,  icon Will be displayed on the LCD monitor and in the 
viewfinder when highlight tone priority is enabled. 
254 
EFTA01126451

arin Custom Function SetMISS • 
C.Fn III: Autofocus/Drive 
C.Fn-7 
AF-assist boam firing 
The AF-assist beam can be emitted by the camera's buit-in flash or by an 
external. EOS-dedicated Speedlite. 
0: Enable 
If necessary, the AF-assist beam will be emitted by the built-in flash or 
external Speedlite. 
1: Disable 
The AF-assist beam is not emitted. 
2: Enable external flash only 
If an external Speedlite is attached, it will emit the AF-assist beam when 
necessary. The camera's built-in flash will not fire the AF-assist beam. 
3: IR AF assist beam only 
Among external Speedtiles. only those which have an infrared AF-assist 
beam will be able to emit the beam. This prevents any Speedlite which 
uses a series of small flashes (like the built-in flash) from firirig the AF-
assist beam. 
With an EX-series Speedlite equipped with a LED light, the LED light will 
not automatically turn on for AF-assist. 
If the external Speedlite's (AF-assist beam firing} Custom Function is set 
to (Disabled]. the Speedlite will not emit the AF-assist beam even if the 
camera's C.Fn-7 m set to 0. 2. or 3. 
C.Fn-8 
Mirror lockup 
0: Disable 
1: Enable 
Prevents mechanical vibrations in the camera caused by the reflex 
mirror action which can disturb shooting with super telephoto lenses or 
close-up (macro) shooting. See page 122 for the mirror lockup 
procedure. 
255 
EFTA01126452

GEO Custom Function Settings°
C.Fn IV: Operation/Others 
C.Fn-9 
ShutterfAE lock button 
0: AF/AE lock 
1: AE lock/AF 
Convenient when you want to focus and meter separately. Press the <*> 
button to autofocus. and press the shutter button halfway to apply AE lock. 
2: AF/AF lock, no AE lock 
In the AI Servo AF mode, you can press the <*> button to stop the AF 
operation momentarily. This prevents the AF from being thrown off by 
any obstacle passing between the camera and subject. The exposure is 
set at the moment the picture is taken. 
3: AE/AF. no AE lock 
This is useful for subjects which keep moving and stopping repeatedly. 
In the Al Servo AF mode, you can press the <*> button to start or stop 
the AI Servo AF operation. The exposure is set at the moment the 
picture is taken. Thus, the optimum focusing and exposure wil always 
be achieved as you wait for the decisive moment. 
C.Fn-10 
Assign SET button 
You can assign a frequently-used function to <e>. Press <0). when the 
camera is ready to shoot. 
0: Normal (disabled) 
1: Image quality 
Press <e> to display the image-recording quality setting screen on the 
LCD monitor. Select the desired inage-recording quality. then press <63>. 
2: Flash exposure compensation 
When you press < (0>. the flash exposure compensation setting screen 
will appear. Set the flash exposure compensation. then press <e›. 
3: LCD monitor On/Off 
Assigns the same function as the <DISP.> button. 
4: Menu display 
Press <C.,??,> to display the menu screen. 
5: ISO speed 
The ISO speed setting screen will appear. Press the <4k> key or turn 
the <C4> dial to change the ISO speed. You can also refer to the 
viewfinder to set the ISO speed. 
256 
EFTA01126453

® 
Custom Function Settings
C.Fn-11 
LCD display whon powor ON 
0: Display on 
When the power switch is turned on. the shooting settings will be 
displayed (p.47). 
1: Previous display status 
If you pressed the <DISP.> button and turned off the camera while the 
LCD monitor was off. the shooting settings will not be displayed when 
you turn on the camera again. This helps to save battery power. The 
menu screens and image playback will still be displayed when used. 
If you pressed the <DISP.> button to display the shooting settings and 
then turn off the camera. the shooting settings will be displayed when 
you turn Co the camera again. 
257 
EFTA01126454

MENU Registering My Menu*
Under the My Menu tab, you can register up to six menu options and 
Custom Functions whose settings you change frequently. 
Mr Wriu srmnps 
YY Ihmu strict% 
Nrisr.ter to Mt str..,
Sort 
Wee RenUtears 
Dein. Yi amn 
Sad nen lb flirter 
CV.").
Mp 
Meat itsAler ntan card 
trope renew 
Nriphitral aaflfl COMM 
iled-eye Wu( 
1 
Select (My Menu settings). 
• Under the (*I tab. select [My Menu 
settings]. then press <R, . 
2 Select [Register to My Menu]. 
• Select [Register to My Menu]. then 
press <6;)›. 
About My Menu settings 
Register the desired items. 
• Select the dem to bo registered, then 
press Ce›. 
• On the confirmation dialog. select 
(OK] and press <O> to register the 
item. 
• You can register up to six items. 
• To return to the screen in step 2. 
press the <MENU> button. 
• Sort 
You can change the order of the registered items in My Menu. Select 
[Sort] and select the item whose order you want to change. Then 
press <a>. With [$1 displayed. press the <AY> key to change the 
order, then press <O>. 
• Delete Item/Items and Delete all Items 
You can delete any of the registered items. (Delete Item/Items] 
deletes one item at a time, and (Delete all Items] deletes all items. 
• Display from My Menu 
When [Enable] is set. the (*I tab will be displayed first when you 
display the menu screen. 
258 
EFTA01126455

I 
Reference 
This chapter provides reference information for camera 
features, system accessories. etc. 
EFTA01126456

Using a Household Power Outlet 
With AC Adapter Kit ACK-E8 (sold separately), you can connect the 
camera to a household power outlet and not worry about the remaining 
battery level. 
Connect the power cord. 
• Connect the power cord as shown in 
the illustration. 
• After using the camera. unplug the 
power plug from the power outlet. 
2 Connect the DC Coupler. 
• Connect the cord's plug to the DC 
Coupler. 
3 Insert the DC Coupler. 
• Open the cover and insert the DC 
Coupler until it locks in place. 
4  Push in the DC cord. 
• Open the DC cord hole cover and 
install the cord as shown. 
• Close the cover. 
Do not connect or disconnect the power cord while the camera's power 
switch is set to <0N>. 
260 
EFTA01126457