EFTA01126198

Viewing the Images on TV 
Viewing on Non-HD (High-Definition) TV Sets 
Connect the provided AV cable to 
the camera. 
• With the plug's <Canon> logo lacing 
the back of the camera, insert It into 
the < AN OUT> terminal. 
I-42 Connect the AV cable to the TV 
Of
set. 
® L 
• Connect the AV cable to the Ws 
video IN terminal and audio IN 
O MO 
terminal. 
3 Turn on the TV and switch the 
N's video input to select the 
connected port. 
Set the camera's power switch to 
<0N>. 
Press the <CI> button. 
l• The image will appear on the TV 
screen (Nothing will be displayed on 
the camera's LCD monitor). 
• To playback movies, see page 212. 
4 
5 
• Do not use any AV cable other than the one provided. Images might not 
be displayed if you use a different cable. 
• If the video system format does not match the TVs. the images will not 
be displayed properly. Set the proper video system format with (4" Video 
system]. 
221 
EFTA01126418

El Protecting Images 
Protecting an image prevents it from being erased accidentally. 
CM Protecting a Single Image 
n-Proted urtatt: 
Select rnions 
At imagas in fader 
Unpictect all aniges n foot( 
AS imItti On card 
Unprotett NI axon on cad 
Image protect icon 
Select [Protect images'. 
• Under the WI tab, select (Protect 
images], then press <s>. 
• The protect setting screen will 
appear. 
2 Select [Select images]. 
• Select [Select Images], then press 
<n> 
Protect the image. 
• Press the <•40, > key to select the 
image to be protected. then press 
<e>. 
O. When an image is protected. the 
<O> icon will appear on the top of 
the screen. 
• To cancel the image protection. press 
<5> again. The <9> icon will 
disappear. 
• To protect another image. repeat step 
3. 
• To exit the image protection. press 
the <MENU> button. The menu will 
reappear. 
222 
EFTA01126419

9 Protecting Images 
1219 Protecting All Images in a Folder or Card 
You can protect all the images in a folder or card at one time. 
When you select (All Images In folder) 
or [All Images on card) In [a. Protect 
Images], all the Images in the folder or 
card will be protected. 
To cancel the image protection. select 
lUnprotect all Images in folder] or 
Illnprotect all images on card] 
«Protect urnape. 
SAKI Imps 
I AB 'mei In fold,
Unprotect AY Images n 'oda 
All Inagn On cad 
UnpirAect As lemon to rand 
=at 
0 If you format the card (p.45), the protected images will also be erased. 
• Movies can also be protected. 
• Once an image is protected. rt cannot be erased by the camera's erase 
function. To erase a protected image. you must first cancel the 
protection. 
• If you erase all the images (p.225). only the protected images vas 
remain. This is convenient when you want to erase unnecessary images 
all at once. 
223 
EFTA01126420

Erasing Images 
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.222) will not be erased. 
0 
Once an Image Is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing It. To prevent 
important Images from being erased accidentally, protect 
them. Erasing a CM +I L Image will erase both the am and 
IL Images. 
Erasing a Single Image 
2 
Playback the image to be erased. 
Press the <11p button. 
► The erase dialog will appear at the 
bottom of the screen. 
3 Erase the images. 
• Select (Erase). then press c(E)>. The 
Image displayed will be erased. 
Checkmarking <J> Images to be Erased in a Batch 
By checkrnarking the images to be erased, you can erase multiple 
images at one time. 
Select [Erase images]. 
• Under the (El tab, select [Erase 
Images], then press ce> 
224 
EFTA01126421

b Erasing Images 
2 Select [Select and erase images]. 
• Select [Select and erase Images]. 
then press Ce>. 
► The images will be displayed. 
• To display the three-image display. 
press the <act, button. To return to 
the single-image display, press the 
cq> button. 
3 Select the images to be erased. 
• Press the <Ale.> key to select the 
image to be erased, then press the 
<AT> key. 
► A <V> checkmark will be displayed 
on the upper left. 
• To select other images to be erased, 
repeat step 3. 
4 Erase the images. 
• Press the <b> button. 
• Select [OK], then press <e>. 
► The selected images will be erased. 
ME Erasing All Images In a Folder or Card 
You can erase all the images in a folder or card at one time. When [D' 
Erase Images] is set to [All Images In folder] or [All Images on card]. 
all the images in the folder or card will be erased. 
To also erase protected images. format the card (p.05). 
225 
EFTA01126422

INFO. Shooting Information Display 
Sample Image Taken in a Creative Zone Mode 
Exposure compensation amount 
Flash exposure 
compensation amount 
Aperure 
Pro:ect 
Rating 
Folder minter - File number 
Shutter speed 
Metenng mode 
Shooting mode 
White balance 
Image-recording 
quality 
1/125 
8:0 0- h 
4
1
1
1
 
_
S
.
,
 
I00-0332 
P Llg 
2/3 
401- 
. 
rld 
OA2.01 gg3. 0. 0. 0 
Aga 
24. IA8 
003 
12/18 
'R02/28/2011 13:30:00 
Playback nu-nberf I
Total images recorded 
Eye-Fi transmission 
Histogram 
(Brightness/ROB) 
icture Style/Settings 
ISO speed 
-Highlight tone priority 
Color space 
-Shootkig date and 
time 
White balance correction 
File size 
' With an • IL images, the 00 Me size is displayed. 
' For still photos taken in movie shooting mode. <IP,  will be displayed. 
'H a Creative filter or Resize has been applied to the image. the <2594> icon will 
change to 
Photos taken with flash without any flash exposure compensation are marked 
with the <0> icon. Photos taken with flash exposure compensation are marked 
with the <fa> tan. 
226 
EFTA01126423

IPIFO. Shcobng Information Display 
Sample Image Taken in a Basic Zone Mode 
Shooting mode 
I/125 
8 0 
ICO-lit . 
Nowa 
dr, 
C₹J 
DF.400 
24 5.1lB 
Vied 
eta 
Daylight 
12/18 
02/28/2011 13 30 00 
Ambience and 
ambience effects 
L.ghttig or scene 
' For images taken in Basic Zone modes. the infcimaticn displayed differ 
depending on the shooting mode. 
' Photos taken in the <I2),  mode vnll show (Background blur). 
Sample Movie Taken in Movie Mode 
Shooting brae 
Movie/Playback 
Movie shooting 
mode 
Recording 
system 
El; 
S S 
CC,
C' 
LtNi..31.7 CS 
IF 
02'2S 20'i 13 33 
Movie recording 
 
Frame rate 
Size 
Shutter speed and 
aperture for movie 
shooting 
Movie file size 
' If manual exposure was used, the shutter speed, aperture, and ISO speed 
(when set manually) wdl be displayed. 
• The <le, icon vnll be displayed for a video snapshot. 
227 
EFTA01126424

INFO. Sheeting Information Deploy 
• About the Highlight Alert 
When the shootiv information is displayed, any overexposed areas of the 
image will blink. To obtain more image detail in the overexposed areas, set 
the exposure compensation to a negative amount and shoot again. 
• About the Histogram 
The brightness histogram shows the exposure level distribution and 
overall brightness. The RGB histogram is for checking the color 
saturation and gradation. The display can be switched with In' 
Histogram). 
[Brightness] Display 
This histogram is a graph showing the distribution of 
the image's brightness level. The horizontal axis 
indicates the brightness level (darker on the left and 
brighter on the right). while the vertical axes indicates 
how many pixels exist for each brightness level. The 
more pixels there are toward the left, the darker the 
image. And the more pixels there are toward the right. 
the brighter the image. If there are too many pixels on 
the left. the shadow detail MI be lost. And if there are 
too many pixels on the right. the highlight detail will be 
lost The gradation in-between will be reproduced. By 
checking the image and its brightness histogram. you 
can see the exposure level inclination and the overall gradation. 
(RGB] Display 
This histogram is a graph showing the distribution of each primary colors 
brightness level in the image (RGB or red, green, and blue). The horizontal 
axis ildicates the color's brightness level (darker on the left and brighter 
on the right), while the vertical axis indicates how many pixels exist for 
each color brightness level. The more pixels there are toward the left, the 
darker and less prominent the color. And the more pixels there are toward 
the right, the brighter and denser the color. If there are too many pixels on 
the left, the respective color information will be lacking. And if there are too 
many pixels on the right, the color will be too saturated with no detail. By 
checking the image's RGB histogram, you can see the colors saturation 
and gradation condition and white balance inclination. 
Sample Histograms 
Clark image 
Ask 
Normal Onghtness 
sco t imago 
228 
EFTA01126425

10 
Post-Processing 
Images 
After shooting, you can apply Creative fillers or resize 
the images (downsize the pixel count). 
Ili • It may not be possible to process images shot with a different 
camera. 
• Post-processing images as descnbed in this chapter cannot be 
done while the camera is connected to a personal computer 
via the <DIGITAL> terminal. 
EFTA01126426

Creative Filters 
You can apply the following Creative filters to an image and save it as a 
new image: Grainy B/W, Soft focus, Fish-eye effect, Toy camera effect. 
and Miniature effect. 
1 Select [Creative filters]. 
• Under the 
] tab. select !Creative 
filters]. then press CS>. 
I> The images will be displayed. 
2 Select an image. 
• Select the image you want to apply a 
filter to. 
• By pressing the <RA> button, you 
can switch to the index display and 
select an image. 
3 Select a filter. 
• When you press <e>. the Creative 
filters will be displayed. 
• For details on Creative filter 
characteristics, see page 232. 
• Press the <111.> key to select a filter. 
then press <e>. 
• The image applied with the respective 
filter will be displayed. 
A. 
4 Adjust the filter effect. 
• Press the <AI.> key to adjust the 
filter effect, then press <5>. 
gor 
• 
• For the Miniature effect. press the 
<0> key and select the image area 
(within the white frame) where you 
want the image to look sharp. Then 
press <CD>. 
230 
EFTA01126427

Creative Filters 
5 Save the image. 
• Select (OK) to save the image. 
• Note the destination folder and Image 
file number, then select (OK). 
• To apply a filter to another image. 
repeat steps 2 to 5. 
• To exit and return to the menu. press 
the <MENU> button. 
With MS ar glataL images. the MB rnage will be applied with the 
Creative filter and saved as a JPEG image. It an aspect ratio has been set 
for Live View shooting and a Creative Star is applied to the OE image, the 
image will be saved in the aspect ratio that was set. 
231 
EFTA01126428

Creative AMES 
Creative Filter Features 
• 
Grainy B/W 
Makes the image grainy and black and white. By adjusting the 
contrast, you can change the black-and-white effect. 
• / Soft focus 
Gives the image a soft look. By adjusting the blur, you can change 
the degree of softness. 
• a Fish-eye effect 
Gives the effect of a fish-eye lens. The image will have a barrel-type 
distortion. 
Depending on the level of this filter effect, the area trimmed along 
the periphery of the image changes. Also. since this filter effect will 
magnify the image center, the apparent resolution at the center may 
degrade depending on the number of recorded pixels. So in step 4. 
set the filter effect while checking the resulting image. 
• n3) Toy camera effect 
Gives a color cast typical of toy cameras and darkens the image's 
fours corners. By adjusting the color tone, you can change the color 
cast. 
• A Miniature effect 
Creates a diorama effect. You can change where the image looks 
sharp. In step 4. you can press the <INFO.> button to change the 
orientation (vertical horizontal) of the white frame that shows where 
you want the image to look sharp. 
232 
EFTA01126429

EJ Resize 
You can resize an image to make the pixel count lower and save it as a 
new Image. Resizing an image is possible only with JPEG L/M/S1/S2 
images. JPEG $3 and RAW images cannot be resized. 
, - 
Pane 
ene rripe$ 
Pin ado 
Cream* Inn 
I htwe 
4E.
rt.
ICU .14!•6171,4
7-.2 
Uu • 
Al 
SI 
51"' $3 
Target saes 
Select [lionize]. 
• Under the (a'l tab, select (Realzel, 
then press <e>. 
I. The images will be displayed. 
2 Select an image. 
• Select the image you want to resize. 
• By pressing the <IS2.0.> button. you 
can switch to the index display and 
select an image. 
Select the desired image size. 
• Press <i;;D> to display the image 
sizes. 
• Press the <4.> key to select the 
desired Image size, then press <e>. 
Save the image. 
• Select [OK) to save the image. 
• Note the destination folder and image 
file number, then select [OK). 
• To resize another image, repeat steps 
2 to 4. 
• To exit and return to the menu. press 
the <MENU> button. 
• 
233 
EFTA01126430

a Ross. 
Resize Options According to Original Image Size 
Original Image Size 
Available Rash Settings 
M 
$1 
52 
53 
I. 
O 
O 
O 
O 
M 
O 
O 
O 
51 
O 
O 
52 
O 
53 
About Image Sizes 
Images such as the [8.0M 3458x2304] image size displayed in step 3 
(p.233) have a 3:2 aspect ratio. The image size according to aspect 
ratios is shown in the table below. The asterisked image-recording 
quality figures do not exactly match the aspect ratio. The image will be 
slightly cropped. 
Quality 
Aspect Ratio and Pixel Count (Approx.) 
3:2 
4:3 
16:9 
1:1 
M
3456x2304 
(8.0 megapixels) 
3072x2304 
(7.0 megapocels) 
3456x1944 
(6.7 megapixels) 
2304x2304 
(5.3 megapixels) 
SI 
2592x1728 
(4.5 megapixels) 
2304x1728 
(4.0 megapixels) 
2592x1456' 
(3.8 megapixels) 
1728x1728 
(3.0 megapixels) 
52 
1920x1280 
(2.5 megapixels) 
1896)(1280' 
(2.2 megapixels) 
1920x1080 
(2.1 megapixels) 
1280x1280 
(1.6 megapixels) 
53 
720x480 
(360.000 pixels) 
640x480 
(310.000 pixels) 
720x400' 
(290.000 pixels) 
480x480 
(230.000 pixels) 
234 
EFTA01126431

Printing Images 
• Printing (p.236) 
You can connect the camera directly to a printer and print 
out the images in the card. The camera is compatible with 
PictBridge" which is the standard for direct printing. 
• Digital Print Order Format (DPOF) (p.245) 
DPOF (Digital Print Order Format) enables you to print 
images recorded in the card according to your printing 
instructions such as the image selection, quantity to print. 
etc. You can print multiple images in one batch or give the 
print order to a photofinisher. 
EFTA01126432

Preparing to Print 
The direct printing procedure Is done entirely with the camera 
while you look at the LCD monitor. 
Connecting the Camera to a Printer 
fl ‘IZC.
It'
Set the camera's power switch to 
<OFF>. 
2 Set up the printer. 
• For details. see the printer's 
instruction manual. 
3 Connecting the camera to the 
printer. 
• Use the interface cable provided with 
the camera. 
• Connect the cable to the camera's 
<DIGITAL> terminal with the cable 
plug's <•e> icon facing the front of 
the camera. 
• To connect to the printer, refer to the 
printer's Instruction manual. 
A Turn on the printer. 
Set the camera's power switch to 
<ON>. 
• Some printers may make a beeping 
sound. 
236 
EFTA01126433

Preparing to Print 
4 PictBridge 
Pei, (Ara 
sr son 
romt• ZQ 01/ 
wra
0, rm 
000er'ess 
6 Playback the image. 
• Press the <CI> button. 
• The image will appear, and the <Ii( > 
icon will appear on the upper left to 
indicate that the camera is connected 
to a pdnter. 
4.0 • Movies cannot be printed. 
• The camera cannot be used with printers compatible only nth CP Direct 
or Bubble Jet Direct 
• Do not use any interface cable other than the one provided. 
• If there is a long beeping sound in step 5. it indicates a problem with the 
printer. Resolve the problem displayed by the error message (p244). 
• You can also print RAW images taken with this camera. 
• If you use a battery pack to power the camera, make stre it is fully 
charged. With a fully-charged battery. printing up to about 4 hours is 
possible. 
• Before disconnecting the cable. fret tum off the camera and printer. Hold 
the plug (not the cord) to pull out the cable. 
• Fcc direct printrig. using AC Adapter Kit ACK-E8 (sold separately) to 
power the camera is recommended. 
237 
EFTA01126434

M( 
Printing 
The screen display and setting options will differ depending on the 
printer. Some settings might not be available. For details. see the 
printer% instruction manual. 
Printer-connected icon 
P-"airmir 
- 
MO. Co 
p, otcfc 
t ifftelem 
2 
Print setting screen 
1 Select the image to be printed. 
• Check that the <ey > icon is 
displayed on the upper left of the LCD 
monitor. 
• Press the <O.> key to select the 
image to be printed. 
Press <e>. 
► The print setting screen will appear. 
Sets the printing effects (p.240). 
Sets the date or file number enpinteig to on 
or off. 
Sets the quantity to be printed. 
Sets the trimming (cropping) (p.243). 
Sets the paper size. type. and layout 
Returns to the screen in step 1. 
Starts the prinbng. 
The paper size. type, and layout you have set are displayed. 
• Depending on the printer, certain settings such as the date and file 
number imprinting and trimming might not be selectable. 
3 Select [Paper settings). 
• Select [Paper settings]. then press 
<e›. 
► The paper settings screen will 
appear. 
238 
EFTA01126435

/(Printing 
ID Setting the Paper Size 
Select the size of the paper loaded in 
the printer, then press ce>. 
IP. The paper type screen will appear. 
fp Setting the Paper Type 
Select the type of the paper loaded in 
the printer, then press cep>. 
-- The page layout screen will appear. 
W.: Setting the Page Layout 
4) if' IIP 
pm wait 
tedsrect
Ilerekrielle 
dean 
• Select the page layout then press 
CS>. 
IP. The print setting screen will reappear. 
Bordered 
The pnnt will have white borders along the edges. 
Borderless 
The print will have no borders. If your printer cannot print 
bordertess prints, the print wM have borders. 
Borderede 
The shooting information' will be imprinted on the border on 
9x I 3crn and larger prints. 
xx-up 
Option to print 2.0. 8.9. 16. or 20 images on one sheet. 
20-up,' 
35up0 
Twentyor 35 images wIl be printed as thwnbnals on At or Letter size paper7. 
• (20-upffill will have the shooting informations' imprinted. 
Default 
The page layout will vary depending on the printer model or its settings. 
'1:From the Eeldela. the Camera name. lens name. sneconginede. Shutter speed.aperwre. 
exposure CanpensatiOn ;Solemn. ISO speed. white Weave. etc.. NIII be annealed. 
'2:After ordering the prints with 'Digital Prot Order Fe•mat (DPOFT (p.205). you should 
pent by keowIng 'Direct Printing with DPOP (p.248). 
If the Swage's aspect ratio is different from the printing paper's aspect ratio. 
the image may be cropped significantly if you print it as a bordedess pnnt. If 
the image is cropped, it may look more grainy on the paper due to the fe rer 
mother of pixels. 
239 
EFTA01126436

/(Printing 
4 Set the printing effects. 
• Set as necessary. If you need not set 
any printing effects. go to step 5. 
• What is displayed on the screen 
differs depending on the printer. 
• Select the option on the upper right 
(circled in the screenshot), then press 
<e>. 
• Select the desired printing effect, then 
press c©>. 
• If the c )> icon is displayed brightly 
next to <M 
>, you can also adjust 
the printing effect (p.242). 
Prindng Effect 
Description 
50n 
The image cod be welted according to the printer's standard 
colors. The image's Exif data is used to make automatic 
corrections. 
50ff 
No automatic correction will be applied. 
®VIVID 
The image will be piled with higher saturation to produce 
more vivid blues and greens. 
®NR 
Image noise is reduced before printing. 
B/W BM 
Prnts ki black-and-while with true blacks. 
B/W Coot tone Prkits n black-and-while with cool, bluish blacks. 
BIW Warm tone Prnts n black-and-while with warm, yellowish blacks. 
0 Natural 
Pints the image in the actual colors and contrast. No
automatic color adjustments are applied. 
CI Natural IA 
The printing characteristics are the same as the 'Natural' 
setting. However. this setting enables finer printing 
adjustments than with 'Natural.' 
5befautt 
The printing will differ depending on the printer. For details. 
see the pnnter's instruction manual. 
' When you change the printing effects. it is reflected In the Image displayed on 
the upper let Note that the printed image might look slightly different from the 
displayed image which is only an approximation. This also applies to 
[Brightness) and (Adjust levels) on page 242. 
240 
EFTA01126437