EFTA01126198

Troubieshcoung Guide 
The maximum burst during continuous shooting is lower. 
• Under [ti Custom Functions (C.Fn)]. set [5: High ISO speed noise 
reduction] to (Standard]. (Low]. or [Disable]. If it is set to [Strong]. 
the maximum burst during continuous shooting will greatly decrease 
(p.254). 
• If you shoot something that has fine detail (field of grass. etc.). the file 
size will be larger and the actual maximum burst might be lower than 
the number mentioned on page 76. 
ISO 100 cannot be set. 
♦ Under (ti Custom Functions (C.Fn)]. if [6: Highlight tone priority] 
is set to (1: Enable]. ISO 100 cannot be set. 11[0: Disable] is set. ISO 
100 can be set (p.254). This also applies to movie shooting (p.159). 
The Auto Lighting Optimizer cannot be set. 
♦ Under (4: Custom Functions (C.Fn)]. if [6: Highlight tone priority] 
is set to (1: Enable]. the Auto Lighting Optimizer cannot be set. 11[0: 
Disable] is set. the Auto Lighting Optimizer can be set (p.254). This 
also applies to movie shooting (p.162). 
ISO speed [H] (ISO 12800) cannot be set. 
• Under (4: Custom Functions (C.Fn)]. if [6: Highlight tone priority] 
is set to [1: Enable]. the (H] ISO speed cannot be selected even when 
(2: ISO expansion] has been set to (1: On]. If (0: Disable] is set. [H) 
can be set (p.252). 
281 
EFTA01126478

Troubleshooting Guide 
When I use the <AV> mode with flash, the shutter speed 
becomes slow. 
• II you shoot at night when the background is dark, the shutter speed 
becomes slow automatically (slow-sync shooting) so that both the 
subject and background are properly exposed. If you do not want a 
slow shutter speed to be set. set [3: Flash sync. speed in Av mode) 
in (V Custom Functions (C.Fn)) to 1 or 2 (p.252). 
The built-in flash pops up by Itself. 
• In the j. 0. $. and 
modes, the built-in flash will pop-up 
automatically when flash is necessary. 
The built-in flash does not fire. 
• II you shoot continuously with the built-in flash at short intervals. the 
flash might slop operating to protect the flash unit. 
I cannot set flash exposure compensation with [External 
flash func. setting]. 
• II flash exposure compensation has been set on an external Speedlite. 
[Flash exp. comp] (p.182) cannot be set in the [External flash func. 
setting) screen. Also. if you set flash exposure compensation with the 
camera and then set flash exposure compensation with the external 
Speedlite. the Speedlite's flash exposure compensation setting will 
override the camera's. When the Speedlite's flash exposure 
compensation is canceled (set to 0). flash exposure compensation can 
be set with the camera. 
High-speed sync cannot be set in the <Ay> mode. 
• Under IV Custom Functions (C.Fn)). set [3: Flash sync. speed in 
Av mode) to [0: Auto) (p.252). 
The camera makes a noise when it is shaken. 
• The built-in flash's pop-up mechanism moves slightly. This is normal. 
282 
EFTA01126479

The shutter makes two shooting sounds during Live View 
Shooting. 
II you use flash. the shutter will make two sounds each time you shoot 
(p.125). 
During Live View and movie shooting, a white <rri > or rod 
<ill> icon is displayed. 
• It indicates that the camera's internal temperature is high. If the white 
<M> icon is displayed, the still photo's image quality might 
deteriorate. If the red <U> icon is displayed, it indicates that the Live 
View or movie shooting will soon be terminated automatically (p.139. 
163). 
Movie shooting terminates by itself. 
• If the card's writing speed is slow. movie shooting may stop 
automatically. Use an SO Speed Class 6 -imAssia -or faster card. To 
rind out the card's readAwite speed. see the card manufacturer's Web 
site. etc. 
The movie shooting will be terminated automatically if the file size 
reaches 4 GB or if the movie length reaches 29 min. 59 sec. 
The image flickers or horizontal stripes appear during movie 
shooting. 
Flickering. horizontal stripes (noise). or irregular exposures can be 
caused by fluorescent light. LED bulbs. or other artificial lighting during 
movie shooting. Also. changes in the exposure (brightness) or color 
tone might also be recorded. With manual exposures. a slow shutter 
speed may solve the problem. 
283 
EFTA01126480

Troubleshecting Guide 
Playback Problems 
The LCD monitor does not display a clear Image. 
• If the LCD monitor is dirty. use a soft cloth to clean it. 
• In low or high temperatures. the LCD monitor display may seem slow 
or might look black. It will return to normal at room temperature. 
Part of the Image blinks in black. 
• It is the highlight alert (p.228). Overexposed highlight areas with a loss 
of highlight detail will blink. 
The image cannot be erased. 
• If the image has been protected. it cannot be erased (p.222). 
The movie cannot play. 
• Movies edited with a personal computer using the provided 
ZoomBrowser EX/Image8rowser (p.302) or other software cannot be 
played with the camera. However, video snapshot albums edited with 
ZoomBrowser EX/Image8rowser can be played on the camera. 
When the movie is played. camera operation noise can be 
heard. 
• If you operate the camera's dials or lens during movie shooting, the 
operation noise will also be recorded. Use an external microphone 
(commercially available) (p.160). 
The movie has still moments. 
• During autoexposure movie shooting. if there is a drastic change in the 
exposure level, the recording will slop momentarily until the brightness 
stabilizes. If this happens, use manual exposure (p.144). 
284 
EFTA01126481

TroubleshooUng Guge
The subject looks distorted during movie shooting. 
• If you move the camera to the left or right quickly (high-speed panning) 
or shoot a moving subject. the image may look distorted. 
No Image appears on the TV screen. 
• Make sure the AV cable or HDMI cable's plug is inserted all the way in 
(p.218. 221). 
• Set the video OUT system (NTSC/PAL) to the same video system as 
the TV set (p.221). 
My card reader does not recognize the card. 
• Depending on the card reader and computer OS used. SDXC cards 
might not be correctly recognized. In such a case. connect your 
camera to the computer with the provided interface cable. then 
transfer the images to your computer using EOS Utility (provided 
software. p.302). 
Display Problems 
The menu screen shows few tabs and options. 
• In Basic Zone modes and in movie shooting mode, certain tabs and 
menu options are not displayed. Set the shooting mode to a Creative 
Zone mode (p.43). 
The file name's first character is an underscore ("_MG_"). 
• Set the color space to sRGB. If Adobe RGB is set. the first character 
will be an underscore (p.121). 
285 
EFTA01126482

Troubleshoots's° Guide 
The file name starts with "MVI". 
♦ H is a movie He (p.171). 
The shooting date and time displayed is incorrect. 
♦ The correct date and time has not been set (p.34). 
The date and time is not in the picture. 
• The shooting date and time does not appear in the picture. The date 
and time is instead recorded in the image data as shooting 
information. When printing, you can imprint the date and time in the 
picture by using the date and time recorded in the shooting information 
(p.241). 
[NM is displayed. 
♦ If the card has recorded a number of images greater than the camera 
can display. [WM will be displayed (p.207). 
[Eye•Fi settings] does not appear. 
♦ [Eye-Fi settings) will appear only when an Eye-Fi card is inserted into 
the camera. If the Eye-Fi card has a write-protect tab set to the LOCK 
position, you will not be able to check the cards connection status or 
disable Eye-Fi card transmission (p.265). 
Printing-Related Problems 
There are fewer printing effects than listed in the instruction 
manual. 
• What is displayed on the screen differs depending on the printer. This 
instruction manual ists all the printing effects available (p.240). 
286 
EFTA01126483

Error Codes 
E "Of No. 
• _I 
Wel 
Camnicedons bonen 
tre unero axl leas b 
'no 
Dean cht Wert COMICS 
Countermeasures 
II there is a problem with the camera, an 
error message will appear. Follow the on-
screen Instmetions. 
No. 
Error Message & Solution 
01 
Communications between the camera and lens Is faulty. Clean the 
lens contacts. 
4 Clean the electrical contacts on the camera and lens and use a 
Canon lens (p.15. 18). 
02 
Card cannot be accessed. Reinsert/change card or format card 
with camera. 
4 Remove and insert the card again. replace the card. or format the 
card (p.29. 45). 
04
Cannot save Images because card Is full. Replace card. 
4 Replace the card. erase unnecessary images. or format the card 
(p.29. 220. 45). 
06 
The built-In flash could not be raised. Turn the camera off and on 
again. 
4 Operate the power switch (p.32). 
06 
Sensor cleaning is not possible. Turn the camera off and on 
again. 
4 Operate the power switch (p.32). 
10. 20.
30. 40.
c50• GO• 
70. 80 
Shooting Is not possible due to an error. Turn the camera off and 
on again or re-Install the battery. 
4 Operate the power switch. remove and eistall the battery pack 
again. or use a Canon lens (p.32. 28). 
• If the error still persists. wrtte down the error No. and contact your nearest 
Canon Service Center. 
287 
EFTA01126484

Specifications 
• Type 
Type: 
Recording media: 
Image sensor size: 
Compatible lenses: 
Lens mount: 
• Image Sensor 
Type: 
Effective pixels: 
Aspect ratio: 
Oust delete feature: 
• Recording System 
Recording format: 
Image type: 
Recorded pixels: 
• Image Processing 
Picture Style: 
Basic•: 
White balance: 
Noise reduction: 
Automatic image 
brightness correction: 
HigNight tone priority: 
Lens peripheral 
illumination correction: 
Digital. Engle-lens reflex. AF/AE camera with built-in flash 
SD memory card. SOHC mernary card. SOXC memory card 
Approx. 22.3 x 14.9 mm 
Canon EF lenses (in cludng EF-S lenses) 
(35mm-equivalent focal length is approx. 1.6 times the 
lens focal length) 
Canon EF mount 
CMOS sensor 
Approx. 18.00 rnegapixels 
3:2 
Auto. Manual. Oust Delete Data appending 
Design rule for Camera File System 2.0 
JPEG. RAW (14-bit Canon original) 
RAW+JPEG Large simultaneous recording possible 
L (Large) 
: Approx. 17.90 rnegapixels (5184 x 3456) 
M (Medium) : Approx. 8.00 megapixels (3456 x 2304) 
SI (Small 1): Approx. 4.50 megapixels (2592 x 1728) 
S2 (Small 2): Approx. 2.50 megapixels (1920 x 1280) 
S3 (Small 3): Approx. 350.000 pixels (720 x 480) 
RAW 
: Approx. 17.90 rnegapixels (5184 x 3456) 
During Shooting 
Auto. Standard. Portrait. Landscape. Neutral. Faithful. 
Monochrome. User Def. 1- 3 
Shoot by ambience selection. Shoot by lighting or scene type 
Auto. Preset (Daylight. Shade. Cloudy. Tungsten tight. 
White fluorescent light. Flash). Custom 
White balance correction and white balance bracketing 
features provided 
• Flash color temperature informatbn communication provided 
Applicable to long exposures and high ISO speed shots 
Auto Lighting Optimizer 
Provided 
Provided 
288 
EFTA01126485

Specifications 
• Viewfinder 
Type: 
Coverage: 
Magnification: 
Eye point 
Built-n dope.no aqustment 
Focusing screen: 
Mirror: 
Depth-of-field preview: 
• Autefocus 
Type: 
AF points: 
Metering range: 
Focus modes: 
AF-assist beam: 
• Exposure Control 
Metering modes: 
Metering range: 
Exposure control: 
ISO speed: 
(Recommended 
exposure index) 
Exposure compensation: 
AE lock: 
Eye-level pentamirror 
VerticalHorizontal approx. 95% (with Eye point approx. 19 mm) 
Approx. 0.85x (-1 m'1 with 50mm lens at infinity) 
Approx. 19 mm (From eyepiece lens center at -1 ma) 
Approx. 4.0 - +1.0 m'1 (dial) 
Fixed. Precision Matte 
Ouidc-return type 
Prcwided 
TTL secondary image-registration. phase detection 
9 AF points 
EV -0.5 -18 (at 23°C/73•F. ISO 100) 
One-Shot AF. Al Servo AF. Al Focus AF. Manual focusing 
(MF) 
Sinai series of flashes fred by buil-in flash 
63-zone TTL full-aperture metering 
• Evaluative meterng (linked to all AF ports) 
• Partial metering (approx. 9% of viewfinder at center) 
• Spot metering (approx. 4% of viewfinder at center) 
• Center-weighted average metering 
EV 1 - 20 (at 23°C/73°F with EF50mm 01.4 USM lens. 
ISO 100) 
Program AE (Scene Intelligent Auto. Flash Off. Creative 
Auto. Portrait. Landscape. Close-up. Sports. Night 
Portrait. Program), shutter-priority AE. aperture-priority 
AE. manual exposure. automatic depth-of-field AE 
Basic gone modes: ISO 100 - 3200 set automatically 
Creative Zone modes : ISO 100 - 6400 set manually 
(whole-stop increments), ISO 103 - 6400 set 
automatically. maximum ISO speed settable for ISO 
Auto, or ISO expansion to 'H' (equivalent to ISO 12800) 
Manual: t5 stops ki 1/3- or 1/2-stop increments 
AEB: 
±.2 stops n 1/3- or 1/2-stop increments (Can be 
combined with manual exposure compensation) 
Auto: 
Applied in One-Shot AF mode with evaluative 
metering when focus is achieved 
Manual: By AE lock button 
289 
EFTA01126486

Specific:mons 
• Shutter 
Type: 
Shutter speeds: 
• Flash 
Suit-in flash: 
External flash: 
Flash metering: 
Rash ecosere cavitation: 
FE lodt: 
PC terminal: 
• Drive System 
Drive mode: 
Ccntnuous shoceng speed: 
Max. burst: 
Electronically-controlled. focal-plane shutter 
1/4000 sec. to 1/60 sec. (Scene Intelligent Auto mode). 
X-sync at 1/200 sec. 
1/4000 sec. to 30 sec.. bulb (Total shutter speed range. 
Available range varies by shooting mode.) 
Retractable. auto pop-up flash 
Guide No.: Approx. 13/43 (ISO 100. in meters/feet) 
Flash coverage: Approx. 17mm lens angle of view 
Recycling time approx. 3 sec. 
Wireless master triit function provided 
EX-series Speedlite (Flash functions satiable with the 
camera) 
E-TTL II autoflash 
x2 stops in 1/3- or 1/2-stop increments 
Provided 
None 
Single shooting. continuousshooting. self-timer wit 10-sec. 
or 2-sec delay and 10-sec. delay with continuous shooting 
Max. approx. 3.7 shots/sec. 
JPEG Large/Fine: Approx. 34 shots 
RAW. Approx. 6 shots 
RAW+JPEG LargeFine; Approx. 3 shots 
• A
res are based on Canon's testing standards (ISO 
100 and 'Standard' Picture Style) using a 4GB card. 
• Live View Shooting 
Aspect ratio settings: 
3:2. 4:3. 16:9, 1:1 
focusing: 
Live mode. Face detection Live mode (Contrast 
detection). Chick made (Phase-difference detection) 
Manual focusing (Approx. 5x / 10x magnification 
possible) 
Evaluative meterrig with the image sensor 
EV 0 - 20 (at 23°Cf73°F with EF50mm 01.4 USIA lens. 
ISO 100) 
Metering modes: 
Metering range: 
Grid display. 
Two types 
290 
EFTA01126487

Specification 
• Movie Shooting 
Movie compression: 
Audio recording format 
Recording format: 
Recording size 
and frame rate: 
File size: 
Focusing: 
Metering modes: 
Metering range: 
Exposure control: 
Exposure compensation: 
ISO speed: 
(Recommended 
exposure index) 
Digital zoom: 
Video snapshots: 
Sound recording: 
Grid dispLay: 
• LCD Monitor 
Type: 
Monitor size and dots: 
Angle adjustment: 
Brightness adjustment 
Interface languages: 
Feature guide: 
MPEG-4 AVC/H.264 
Variable (average) bit rate 
Linear PCM 
MOV 
1920x1080 (Full HD) : 30p/25pf24p 
1280x720 (HO) 
: 80p/50p 
640x480 (SD) 
:30p/25p 
• 30p: 29.97 fps. 25p: 25.00 fps. 24p: 23.976 fps. 60p: 
59.94 fps. 50p: 50.00 fps 
1920x1080 (30p/25024p) : Approx. 330 MB/min. 
1280x720 (60p/50p) 
: Approx. 330 MB/min. 
640x480 (30p/25p) 
: Approx. 82.5 MBImki. 
Same as focusing with Live View shooting 
Center-weighted average and evaluative metering with 
the image sensor 
' Automatically set by the focusing mode 
EV 0 -20 (at 23t/73T with EF5Omm 1/1A UShl tern. ISO 100) 
Program AE for movies and manual exposure 
t3 stops in 1/3-stop increments (Sal photos: t5 stops) 
With autoexposure shooting: Automeecally set within 
ISO 100 - 6400 
With manual exposure. ISO 100 - 6400 set automatically/ 
manually 
Approx. 3x - 10x 
Settable to 2 sec./4 sec./8 sec. 
Stilt-in monaural microphone 
External stereo microphone terminal provided 
Sound recording level adjustable. wind filter provided 
Two types 
TFT color liquid-crystal monitor 
Wide. 3.0-in. (3:2) with approx. 1.04 million dots 
Possible 
Manual (7 levels) 
25 
Displayable 
I 
291 
EFTA01126488

Specifications 
• Playback 
Image display formats: 
Zoom magnification: 
Image browsing methods: 
Highlight alert 
Movie playback 
Slide show-. 
Background music: 
Bass boost 
• Post-Processing of 
Creative filters: 
Resize: 
• Direct Printing 
Compatible printers: 
Portable images: 
Reit ordering: 
• Custom Functions 
Custom Functions: 
My Menu registration: 
Copyright information: 
• Interface 
Audio/video OUT/ 
Digital terminal: 
Analog video (Compatible with NTSClPALystereo audio output 
For personal computer communication and direct printing 
(Hi-Speed LISB equivalent) 
HOMI rmni OUT terminal: Type C (Auto switching of resolution). CEC-cornpatible 
External microphone 
IN terminal: 
3.5mm dia. stereo mini-jack 
Remote control terminal: For Remote Switch RS-60E3 
Wireless remote control: Remote Controller RC-6 
Eye-Fi card: 
Compatible 
Single image. Single image + Info (Basic info. shooting 
info. histogram). 4-image index. 9-image index. image 
rotate possible 
Approx. 1.5x - 10x 
Single image. jump by 10 or 100 images, by shooting 
date, by folder. by movies. by stills. by rating 
Overexposed highlights blink 
Enabled (LCD monitor. video/audio OUT. HDMI OUT) 
Bustin speaker 
Al images. by date. by folder, movies. stills. or by rabng 
Five transition effects selectable 
Selectable for slide shows and movie playback 
Provided 
Images 
Grainy BM. Soft focus. Fish-eye effect. Toy camera 
effect. Miniature effect 
Possible 
PictBridge-compatible printers 
JPEG and RAW images 
DPOF Version 1.1 compatible 
11 
Possible 
Entry and inclusion possible 
292 
EFTA01126489

Specifications 
• Power 
Battery: 
Battery Pack LP-E8 (Quantity 1) 
' AC power can be supplied via AC Adapter Kit ACK-E8 
' With Battery Gip BG-E8 attached. size-AA/LR6 
batteries can be used 
Battery life: 
With viewfinder shooting: 
(Based on CIPA 
Approx.440 shin at 23°C./731F. approx. 400 shois at O'Cl32'F 
testing standards) 
With Live View avant?: 
Approx. 180 skis at 23°C./731F. approx. 150 shois at 0°Cf32'F 
Movie shoobng time 
Approx. 1 hr. 40 min. at 23°Cl73•F 
Approx. 1 hr. 20 min. at 0°C132•F 
(With a fully-charged Battery Pack LP-EB) 
• Dimensions and Weight 
Dimensions (W x H x 0): Approx. 133.1 x 99.5x 79.7 rnm/ 52x 3.9x 3.1 in. 
Weight 
Approx. 570 g! 20.1 oz. (CIPA Guidelines), 
Approx. 515 g! 18.2 oz. (Body only) 
• Operation Environment 
WAN terrperature range: 0°C - 40°C / 32°F - 104°F 
Working humidity: 
85% or less 
• Battery Pack LP-E8 
Type: 
Rechargeable lithium-ion battery 
Rated voltage: 
7.2 V DC 
Battery capacity: 
t120 mAh 
Vtbiling terrperatire range: During charing: 6°C - 40°C 143°F - 104°F 
During shooting: 
- 40•C 32°F - 104•F 
Working humidity: 
85% or less 
Dimensions (W x H x 0): Approx. 37.1 x 15.4 x 55.2 mm 11.5 x 0.6 x 2.2 in. 
Weight 
Approx. 52 g 11.8 oz. 
• Battery Charger LC-E8 
Compatible battery-. 
Battery Pack LP-EB 
Rechargng time: 
Approx. 2 hours (at 23°C73•F) 
Rated input: 
103 - 240 V AC (50/60 Hz) 
Rated output: 
8.4 V DC /720 mA 
WAN terrperatire large: 6°C - 40°C! 43°F - 104°F 
Working humidity: 
85%a less 
Dimensions (W x H x 0): Approx. 69x 28x 87.5mm/ 2.7x 1.1 x 3.4 in. 
Weight 
Approx. 82 g! 2.9 a 
293 
EFTA01126490

Speci0cabons 
• Battery Charger LC-ESE 
Compatible battery 
Battery Pack LP-ES 
Recharging time: 
Approx. 2 hours (at 23°C/73•F) 
Rated input: 
100 - 240 V AC (50/60 Hz) 
Rated output: 
8.4 V DC 1720 mA 
'Abriong temperature range: 6°C - 40•C 143°F - 104°F 
Woiking humidity. 
85% or less 
Mansions (W x H x D): Approx. 69 x 28 x 87.5 mm 12.7 x 1.1 x 3.4 in. 
Weight: 
Approx. 82 g! 2.9 oz. 
• EF-518-55mm f13.5-5.6 IS II 
Angle of view: 
Diagonal extent: 74°20' - 27°50' 
Horizontal extent: 64°30' - 23°20' 
Vertical extent: 45°30' -15.40' 
Lens construction: 
11 elements in 9 groups 
Minimum aperture: 
f/22 - 36 
Closest focusing dance: 0.25 m 10.82 fl. (From image sensor plane) 
Max. magni0caban: 
0.34x (at 55 mm) 
Field of view: 
207 x 134 - 67 x 45mm/8.1 x5.3 - 2.6x t.8 in. (at 0.25 
m10.82 ft) 
Image Stabilizer. 
Lens shift type 
Filter size: 
58 mm 
Lens cap: 
E-58 
Max. diameter x length: Approx. 68.5 x 70 mm 12.7 x 2.8 in. 
Weight: 
Approx. 200 g / 7.1 oz. 
Hood: 
EW-60C (sold separately) 
Case: 
LP814 (sold separatety) 
• EF-518-55mm fi3.5-5.6 III 
Angle of view: 
Diagonal extent: 74°20' - 27°50' 
Horizontal extent: 64°30' - 23°20' 
Vertical extent: 45°30' -15.40' 
Lens construction: 
11 elements in 9 groups 
Minimum aperture: 
(/22 - 36 
Closest focusing cislance: 0.25 m 10.82 fl. (From image sensor plane) 
Max. magni0cabon: 
0.34x (at 55mm) 
Field of view: 
207 x 134 - 67 x 45 mm / 8.1 x 5.3 - 2.6 x 1.8 in. (at 
0.25 m /0.82 ft.) 
Filter size: 
58 mm 
Lens cap: 
E-58 
Max. diameter x length: Approx. 68.5 x 70.0 mm! 2.7 x 2.8 in. 
294 
EFTA01126491

Specifications 
Weight 
Approx. 195g/6.9 oz. 
Hood: 
EW-60C (sold separately) 
Case: 
LP814 (sold separately) 
• EF-S18-135mm f13.5-5.6 IS 
Angle of view: 
Diagonal extent: 74°20' - 11°30' 
Horizontal extent: 64°30' - 9*30' 
Vertical extent: 45°30' - 8'20' 
Lens construction: 
16 elements in t2 groups 
Minimum aperture: 
822 - 36 
Closest focusing ddancs•: At 18mm focal length: 0.49 in /1.61 ft. 
(327 x 503 mm 112.9 x 19.8 in. field of view) 
At 135mm kcal length: 0A5 m 11.48 ft. 
(75 x 112 mm/ 3.0 x 4.4 it field of view) 
Distance from image sensor plane 
Max. magnification: 
0.21x (at 135mm) 
Image Stabilizer: 
Lens shift type 
Filter size: 
67 mm 
Lens cap: 
E-67 
Max. diameter x length: Approx. 75.4 x 101 mm 13.0 x 4.0 et 
Weight 
Approx. 455 g / 16.0 oz. 
Hood: 
EW-738 (sold separately) 
Case: 
LP1116 (sold separately) 
• All the data above is based on Canon's testing standards and CIPA (Camera 8 
Imaging Products Association) testing standards and guidelines. 
• Dimensions. maximum diameter. length and weight listed above are based on 
CIPA Guidelines (except weight for camera body only). 
• Product specifications and the exterior are subject to change without notice. 
• If a problem occurs vnli a non-Canon lens attached to the camera. consult the 
respective lens maker. 
295 
EFTA01126492

Trademarks 
• Adobe is a trademark of Adobe Systems Incorporated. 
• Windows is a trademark or registered trademark of Kbcrcsoft Corporation n the 
United States and other countries. 
• Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. 
kr the United States and other countries. 
• SDXC logo is a trademark of SD-3C. LLC. 
• HDMI. HDMI logo. and High-Definition Multimedia Interface are a trademark or 
registered trademark of HDMI Licensng LLC. 
• All other corporate and product names and trademarks mentioned in this 
manual are the property of their respective owners. 
About MPEG-4 Licensing 
Mtn product is licensed under AT&T patents for the MPEG-4 standard and may be 
used for encoding MPEG-4 complant video andror decoding MPEG-4 ocmplant video 
that was encoded oNy (1) fora personal and non-commercial moose or (2) by a 
video provider licensed under the AT&T patents to provide MPEG-4 compliant video. 
No license is granted or implied for any ether use for MPEG-4 standard: 
• Notice displayed in English as required 
Use of genuine Canon accessories is recommended 
This product is designed to achieve excellent performance when used with 
genune Canon accessories. Canon shall not be liable for any damage to this 
product and/or accidents such as fee. etc.. caused by the malfunction of non-
genune Canon accessories (e.g.. a leakage and/cc explosion of a battery 
pack). Please note that this warranty does not apply to repairs arising out of the 
malfunction of non-genuine Canon accessories. although you may request 
such repairs on a chargeable basis. 
296 
EFTA01126493

Safety Warnings 
Follow these safeguards and use the equipment properly to prevent injury. death. 
and material damage. 
Preventing Serious Injury or Death 
• To prevent fire. excessive heat. chenscal leakage. and exp!ceacns. follow the 
safeguards below. 
- Do not use any batteries. power sources. and accessories not specified in this 
booklet Do not use any home-made or modified batteries. 
Do not Sheri-emu!. disassemble. or modify the battery pack or backup battery. Do 
not apply heat or apply solder to the battery pack or back-up battery. Do not expose 
the battery pack or bath-up battery 10 me or water. And do not subject the battery 
pack or back-up battery to strong physical stuck. 
- Do not install the battery pack or back-up battery in reversed polanty (4 -). Do not 
mix new and old or different types of batteries. 
- Do not recharge the battery pack °Wade the allowable ambient temperatin range 
of Ot - eirC (32"F - 104-9. Also, do not exceed the recharging time. 
- Do not insert any foreign metallic objects into the electrical contacts of the camera. 
accessories. connecting Cables. MC. 
• Keep the back-up battery away from ctudren. II a child swallows the battery consult a 
physician immediately. (Battery chemicals may harm the stomach and intestines.) 
• When disposing of a battery pack or backup battery. insulate the electrical contacts 
with tape to prevent caned with other metallic objects a batteries. This is to prevent 
fire or an explosion. 
• If excessive heat. smoke, or Pones are emitted diming battery pack recharging. 
Immediately unplug the battery charger from the power outlet to step the recharging 
and prevent a tire. 
• If the battery pack a back-up battery take. changes 0310r. deforms. or tithe smokes 
fumes. remove it immediately. Be careful not to get burned in the process. 
• Prevent any battery leakage from contacting your eyes. skin. and ciztAng. It can 
cause blindness or skin problems. If the battery leakage contacts your eyes. sltht or 
clothing. flush the affected area with lots of dean water without rubbing A See a 
physician immediately. 
• During the recharging. keep the equipment away from the reach of children. The cord 
can accidentally choke the Chid a give an electrical shock. 
• Do not leave any cords near a heal scarce. II can deform the cord or melt the 
insulation and cause a tre or etedrical shock. 
• Do not lore the flash al someone &Wing a car. II may cause an accident. 
• Do not me the flaith near a person's eyes. II may impair the person's ASA When 
using flash to photograph an infant keep at least I meter away. 
• Before storing the earners or accessory Mien not in use. remove the battery pack and 
disconnect the power pkrg. This is to prevent electrical shcck heal generation. and 
fire. 
• Do not use the equipment where there is flammable gas. This is to prevent an 
explosion or fire. 
297 
EFTA01126494

• If you drop Ille emapmenl and the casing breaks open to expose the internal pans. do 
not touch the Internal parts due to the possibility of electrical shock. 
• Do not densemble or modify the equipment. High-voltage internal parts can cause 
electrkal shock. 
• Do not look al the sun or an extremely bright light source through the camera or lens. 
Doing so may damage your vision. 
• Keep the camera from the reach of small children. The neck strap can accidentally 
choke the dint 
• Do not store the equipment in dusty or humid places. This Is to prevent tire and 
electrical shock. 
• Setae using the camera inside an airplane or hospital. check if A Is allowed. 
Electromagnetic waves emitted by the camera may interfere with the plane's 
instruments or the hospital's medical equipment. 
• To prevent lire and electrical shock. Mow the sateguards below: 
- Always insert the power plug al the way in. 
- Do not handle a power plug with wet hands. 
- When unplugging a power plug. grasp and pid the plug instead of the cad. 
- Do not scratch. cut. or excessively bend the cord or put a heavy object on the cord. 
Also do not Wel or lie the cords. 
- Do not connect too many power plugs to the same power outlet. 
- Do not use a cord whose insulation has been damaged. 
• Occasionally unplug the power plug and use a dry cloth to clean on the dust around 
the power outlet. If the surrowiding is dusty. humid. or oily. the dust on the power outlet 
may become moist and short-circuk the outlet to cause a fire. 
Preventing Injury or Equipment Damage 
• Do not leave equipment inside a car under the hot sun or near a heal source. The 
equipment may become hot and cause Pm burns. 
• Do not carry the camera around while It is attached to a biped. Doing so may cause 
Injury. Also make sure the tripod is sturdy enough to supped the camera and lens. 
• Do not leave a lens or lens-attached camera under the sum without the lens cap 
attached. Otherwise. the lens may concentrate the sums rays and cause a fire. 
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may leap 
heal within and cause the catnip to deform or catch lire. 
• If you drop the camera In water or if water or metal fragments enter Inside the camera. 
promptly remove the battery pack and back-up battery. This is to prevent fire and 
elearkal ?Mock. 
• Do not use or leave the battery pack or back-up battery in a ha environment. Doing so 
may cause battery leakage or a skein, battery We. The battery pack or back-up 
battery can a130 become hot and cause skin bums. 
• Do not use pant thinner. tenzene. or other organic solvents to dean the equipment. 
Doing so may cause fire or a health hazard. 
II the product does not work properly or requires repair, contact 
your dealer or your nearest Canon Service Center. 
298 
EFTA01126495

Digital Camera Model D5126311 Systems 
This device complieswith Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference. 
and (2) this device must accept any interference received. including 
interference that may cause undesired operation. 
Note: This equipment has been tested and found to comply with the limits for 
class 8 digital devices, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
eiterference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not intalled and used in 
accordance with the instructions. may cause harmful interference to 
radio communications. However. there is no guarantee that interference 
will not occur in a particular installation. If this eqiipment does cause 
harmful interference to radio or television reception. which can be 
determesed by turning the equipment off and on. the user is encouraged 
to try to correct the interference by one or more of the following 
measures: 
— Reorient cc relocate the receiving antenna. 
— Increase the separation between the equipment and receiver. 
— Connect the equipment into an outlet on a trail different from 
that to which the receiver is connected. 
— Consult the dealer or an experienced radiofIV technician for help. 
The cable with the ferrite core provided with the digital camera must be used 
with this equipment in order to comply with Class B limits in Subpart 8 of Part 
15 of the FCC rules. 
Do not make any changes or modifications to the equipment unless otherwise 
specified in the manual. If such changes or modifications should be made. you 
could be required to stop operation of the equipment. 
Canon U.S.A_ Inc. 
One Canon Plaza. Lake Success. NY 11002, USA 
Tel No. (516)328-5600 
This Class B digital apparatus complies with Canadian ICES-003. 
&
When connecting to and using a household power outlet. use only AC 
Adapter Kit ACK£8 (rated input: 100-240 V AC 50/60 Hz. rated output 
7.0 V DC). Using anything else can cause fire. overheat g, or 
electrical shock. 
299 
EFTA01126496

IMPORTANT SAFETY INSTRUCTIONS 
1. SAVE THESE INSTRUCTIONS — This manual contains inponant safety 
and operativ nstructions for Battery Charger LC-E8 & LC-ESE. 
2. Before using the charger, read all instructions and cautionary remarks on 
(1) the charger. (2) the battery pack, and (3) the product using the battery 
pack. 
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E8. 
Other types of batteries may burst. causng personal injury and other 
damage. 
4. Do not expose the charger to rain or snow. 
5. Use of an attachment not recommended or sold by Canon may result in 
lire. electric shock. or personal injury. 
6. To reduce risk of damage to electric plug and cord, pull by plug rather than 
by cord when disconnectLng charger. 
7. Make sure cord is located so that it will not be stepped on. tripped over. or 
otherwise subjected to damage or stress. 
8. Do not operate the charger with damaged cord or plug - replace them 
immediately. 
9. Do not operate the charger if it has received a sharp blow, been dropped. 
or otherwise damaged in any way: take it to a qualified serviceman. 
10. Do not disassemble the charger, lake it to a qualified serviceman when 
service or repair is required. Incorrect reassembly may result in a risk of 
electric shock or fire. 
11. To reduce risk of electric shock. triplug charger from outlet before 
attempting any mantenance or clearing. 
MAINTENANCE INSTRUCTION 
Unless otherwise stated in this manual, there are no user serviceable parts 
inside. Refer servicing to qualified serviceman. 
USA and Canada only: 
The Lithium ion/polymer battery that powers the product is 
recyclable. Please call 1400-4-BATTERY for information on 
how to recycle this battery. 
For CA. USA only 
Included Lithium battery contains Perdficiraba Material — spend handing may apply. 
See wmv.dtsc.cagovelazardouswastetperchlorate/ for details. 
CAUTION 
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. 
EFTA01126497